Web Exercise

গার্মেন্টস ট্রেড
নোয়াখালী কারিগরি প্রশিক্ষণ কেন্দ্র
গাবুয়া, নোয়াখালী।



Shirt এর বিভিন্ন  Operation এর ধাপ সমূহঃ
      
# Cuff Operation:
   1.Cuff fabric Pieces .
   2.Fuse cuff top part.
   3.Cuff rolling (Sew cuff hem)
   4.Run stitch cuff/ Cuff make.
   5.Trun cuff and press.
   6.Cuff top stitch.

#Collar Operation :
  1.Collar fabric pieces .
  2. Fuse collar top part.
  3.Run stitch collar/collar make.
  4.Turn collar and press.
  5. Top stitch collar.
  6.Fuse collar band (Top part).
  7.Collar band rolling (Heming).
  8.Attach collar /Band .
  9.Collar band top stitch.
  10.Sew middle top stitch.




#Sleve & Placket Operation
  1.Prepare lower placket .
  2.Prepare upper placket.
  3.Cut mark (For placket attach)
  4.Attach lower placket to sleeve.
  5. Attach upper placket to sleeve.
  6.Inside placket.

# Back Yoke Operation
  1.Mark level position
  2.Attach level to yoke.
  3.Join back yoke.

#Pocket & Front Operation
  1.Sew pocket notch hem(rolling).
  2.Prepare pocket for attaching.
  3.Overlock center front.
  4.Make top center .
  5. Mark pocket position.
  6.Attach pocket to front

# Body Assembling  

  1.Front and  back joint.
  2. Shoulder top Stitch .
  3. Sleeves  attach.
  4.Arm hole top stitch.
  5. Sew side seam
  6. Collar and body attach
  7. Collar and body joint top stitch 
  8. Cuff joint.
  9.Bottom heming.
  10.Button position mark hole
  11.Button attach hole
  12.Button attach 



Mid Level Garments Supervisor (Competency)

1.Occupational health and safety (OSH).
2.Cleaning Practice of instruments and work place.
3.Use of measuring ,tools & calculate loads for production work.
4.Operation of different types of machine.
5.Perform basic and job related exercise.
6.Production control ,Productivity and floor management system.
7.Use of machine lay out & operation.
8.Perform pattern construction of shirt and pant.
9. Make basic component of shirt and pant & complete shirt and pant.


Trade: Garments
Course Name: Sewing Machine Operator
Job List:
1. To identify the sewing machine & sitting position (start & stop machine).
2. To identify the principal parts of the machine and threading systems.
3.To practice basic exercise:
   a) with and without thread.
   b) sew straight seam.
   c) sew straight seam with back stitch.
   d) straight seam with matching notch mark.
   e) Right angle corner. 
   f) Curve seam.
4. To practice job related exercise.
   a) Sharp corner.
   b) Short length seam.
   c) Long length seam.
   d) Hem sewing.
   e) Top stitch
   f) Curve seam with matching notch mark.
5.Operation training (shirt)
   a) To make cuff.
   b) To make collar.
   c) To make pocket & front.
   d) To make sleeve placket.
6. Production training (shirt)
   a) To perform back & yoke joint.
   b) To perform shoulder & yoke part joint.
   c) To perform collar & body part joint.
   d) To perform side seam sewing.
   e) To perform cuff & sleeve joint.
   f)  To perform bottom hemming.
   g) To perform bottom attach & holing.
7.Operation training (Pant)
   a) To make pocket for pant.
   b) To make back pocket for pant.
   c) To make front fly attach for pant.
8. Production training (Pant)
   a) To perform back rise sewing.
   b) To perform side seam sewing.
   c) To perform in seam sewing.
   d) To perform pant & waist band sewing. 
   e) To perform waist band  & hook attach.  
   f)  To perform waist band & top stitching.
   g) To perform loop making & setting.
   h) To perform hem sewing.
9. To practice special machine (OLK,B/H,B/A & others machine).
10. To inspect production line of garments .
11.Operate four thread over lock machine.
12. Operate five thread over lock machine.
13. Operate bottom covering chain stitch machine.
14. Operate top & bottom covering chain stitch machine.
15. Operate kansai special  machine.
16. Operate button hole machine.
17. Operate button attach machine.
18.  Operate bar take  machine.
19. Operate zig-zag  machine.
20. Operate vertical trimming  machine.
21. Operate feed of the arm  machine.
22. Operate eyelet hole machine.
               


Trade: Garments
Course Name: Mid Level Supervisor
Job List:
1. To identify the mid label garments machine supervisor.
2. To observe the operation of different machines.
3. To practice about machine operation with paper exercise.
4. To practice on machine and threading .                                  
5. Basic exercise (practice with and without thread)
    a) To practice sew straight seam.
    b) To practice sew straight seam with back stitch.
    c) To practice right angle corner.
    d) To practice curve seam.
6. To practice job related exercise. (practice with and without thread)
    a) Sharp corner.
    b) Short length seam.
    c) Long length seam.
    d) Hem sewing.
    e) Top stitch
    f) Curve seam with matching notch mark.
7.Operation training (shirt)
    a) To make cuff.
    b) To make collar.
    c) To make pocket & front.
    d) To make sleeve placket.
8. Production training (shirt)
    a) To perform back & yoke joint.
    b) To perform shoulder & yoke part joint.
    c) To perform collar & body part joint.
    d) To perform side seam sewing.
    e) To perform cuff & sleeve joint.
    f)  To perform bottom hemming.
    g) To perform bottom attach & holing.
9.Operation training (Pant)
    a) To make pocket for pant.
    b) To make back pocket for pant.
    c) To make front fly attach for pant.
10. Production training (Pant)
    a) To perform back rise sewing.
    b) To perform side seam sewing.
    c) To perform in seam sewing.
    d) To perform pant & waist band sewing. 
    e) To perform waist band  & hook attach. 
    f)  To perform waist band & top stitching.
    g) To perform loop making & setting.
    h) To perform hem sewing.
11. To practice pressing , folding  and packing.
12. To practice special machine (OLK,B/H,B/A & others machine).
13. To inspect production line of garments .
14. To inspect measurement checking procedure finished product.




Trade: Garments
Course Name: Quality Control Management (Garments)
Job List:
1. To identify the measuring  instrument and measurement tape.
2. To identify the woven & knitwear garments.
3. To practice on machine  operation
4. To practice on machine  operation with paper exercise.
5. To practice on machine and threading.
6. Basic exercise (practice with and without thread)
    a) To practice sew straight seam.
    b) To practice sew straight seam with back stitch.
    c) To practice right angle corner.
    d) To practice curve seam.
7.To practice job related exercise. (practice with and without thread)
    a) Sharp corner.
    b) Short length seam.
    c) Long length seam.
    d) Hem sewing.
    e) Top stitch
    f) Curve seam with matching notch mark.
8.Operation training (shirt)
    a) To make cuff.
    b) To make collar.
    c) To make pocket & front.
    d) To make sleeve placket.
9. Production training (shirt)
    a) To perform back & yoke joint.
    b) To perform shoulder & yoke part joint.
    c) To perform collar & body part joint.
    d) To perform side seam sewing.
    e) To perform cuff & sleeve joint.
    f)  To perform bottom hemming.
    g) To perform bottom attach & holing.
10.Operation training (Pant)
    a) To make pocket for pant.
    b) To make back pocket for pant.
    c) To make front fly attach for pant.
11. Production training (Pant)
    a) To perform back rise sewing.
    b) To perform side seam sewing.
    c) To perform in seam sewing.
    d) To perform pant & waist band sewing. 
    e) To perform waist band  & hook attach. 
    f)  To perform waist band & top stitching.
    g) To perform loop making & setting.
    h) To perform hem sewing.
12. To practice special machine (OLK,B/H,B/A & others machine).
13. To practice pattern construction (shirt, pant, knitwear  garments)
14. To inspect production line of garments .
15. To inspect  checking procedure garments. 


-0-





Subscribe to: Posts (Atom)